Aerobic Spray Application
Aerobic spray systems are used to disperse treated wastewater from an aerobic septic system onto the ground surface, usually lawns or designated spray zones. They're used for practical, environmental, and regulatory reasons.
Why Aerobic Spray Systems Are Used
1. Treated Water Is Clean Enough to Spray
Aerobic systems treat wastewater to a higher standard, removing most solids, bacteria, and organic material.
The effluent is clean enough to be dispersed above ground (often disinfected with chlorine tablets or UV light before spraying).
2. Soil Conditions Are Unsuitable for Traditional Drain Fields
Areas with poor, rocky, shallow, or clay soils can’t absorb wastewater through underground drain fields.
Spraying avoids the need for soil absorption by dispersing water onto the surface.
3. High Water Tables or Flood Risk
In places where groundwater is close to the surface, traditional subsurface dispersal could cause contamination.
Spray systems keep water above the water table, reducing health risks.
4. Space Limitations
Some properties are too small or oddly shaped to allow a conventional drain field.
Spray heads can be installed in smaller, flexible zones to match available land.
5. Cost and Simplicity
Surface spray systems can be less expensive than engineered subsurface dispersal alternatives like drip irrigation or mound systems.
Easier to install and inspect.
6. Regulatory Requirements
Some jurisdictions require spray systems with aerobic units when other dispersal methods are not feasible.
Especially common in parts of Texas, Oklahoma, and rural areas with environmental constraints.
7. Reuse for Irrigation (Where Permitted)
The treated water can irrigate lawns or landscaping, reducing potable water use (though not always allowed).
Note: This is non-potable reuse, not suitable for edible crops or human contact.
Project Gallery
